Видео

For now, bitmaps should be able to be color corrected (basic color correction), although there may be incorrect rotation in Vantage. As noted, this is just our initial implementation of export to Vantage capturing the fundamentals, and improvements will come in the future. OFC this also depends on what Vantage supports. You can check our current support and take a look at what Vantage supports in general (that is, from Max and V-Ray, as if it is not supported for V-Ray it won't be supported for Corona either, now or in the future, at least not until it is supported from V-Ray): docs.chaos.com/display/LAV/3ds+Max Hope this helps! Tom

Thank you! A pleasure to meet you again too. With luck one day this may be in person too, at some event, we shall see - meantime, glad you are enjoying the videos :) Tom

Thank you! Do you mean the ability to go from Vantage to Corona, as I am not sure what is meant by "Export settings from Corona Vantage to 3ds Max"? Either way, if you can let us know over on the forums in the Feature Requests section (forum.corona-renderer.com/ ) then it can be properly tracked and considered for our future plans. Thanks! Tom

Sorry you feel that way - do let us know what features you would like to see, that would make it good for architects, via the Feature Request sections of the forums (forum.corona-renderer.com/ ) so that we take those into consideration for future plans. Thanks! Tom

Sorry for the disappointment, but there are no plans to ever support anything beyond 3ds Max and Cinema 4D for Corona. Best regards, Tom

The VFB was rewritten in QT, to make it more responsive and open the door for future improvements and features. Unfortunately the spinning smiley does not work there. While we aim to add some "rendering is in progress" indicator, it most likely will not be the smiley as it doesn't look good inside the new UI - so I'd say it is time to raise a toast, and "Press F to pay respects" as the meme goes, for the spinning smiley. Tom

It is on the cards as something we'd like to develop for the next release of Scatter :) Thanks! Tom

Hi! May I ask you to send that question in as a ticket, support.chaos.com/requests/new, as that way the tech support team can a) reply or b) make a note to write up some extra documentation or c) both :) They won't see the comment here on RUclips however :( Thanks! Tom

There is no live link this version, as the tutorial and release documentation mention. That is something planned for Corona 13. Thanks! Tom

Sorry to hear you are disappointed - please let us know via the Feature Requests on the forums what it is that would make an update a good one for you (forum.corona-renderer.com/ ), as otherwise we don't know what it is that is missing in this release that would have made you feel differently. Thanks! Tom

The channel has a whole lot of videos on just about every topic there is (with the ones dedicated to Corona 12 features coming out over the next few weeks). You can also check out the ever-growing Corona Academy, so long as you have a Corona license (www.chaos.com/corona-academy ). Hope this helps! Tom

Vantage is a separate product, with its own subscription - this applies to V-Ray users too, as well as Corona users (and something we took effort to point out in the forums when people were asking for Vantage compatibility, to make sure people were aware and that it didn't change their interest in having the feature). Meantime, you can test out the functionality with the free trial of Vantage. Thanks! Tom

🙏

Sorry to hear you are having problems. For any issues or technical questions, please send in a ticket at support.chaos.com/requests/new as our tech support team (who are the ones who can help you) won't see any comments made on RUclips. Be sure to mention which DCC you are using, along with its version number. Thanks! Tom

Thank you for the kind words! Tom

It would, but not sure how far that is possible, given that the Corona tone mapping and the Vantage tone mapping are very different, and some aspects may just not translate across at all. We'll take a look during 13 to see if improvements can be made, though. Thanks! Tom

Only 12

Thank you decosimple for getting in there with the right answer! That is correct, you can only export from 12, it is a new feature in 12. Thanks! Tom

Corona can work on any GPU, since it is purely CPU based. Vantage is the part that would need the GPU, and the requirements are on support.chaos.com/hc/en-us/articles/4403291015569-What-are-the-system-requirements-to-run-Chaos-Vantage . Hope this helps! Tom

This adds a second route to get content over into Vantage :) Thanks! Tom

Correct, live link is planned for Corona 13. Thanks! Tom

You are welcome! You can always share any results (that you want to share, and that you can share based on client NDAs etc.) over on the forums forum.corona-renderer.com/ as we'd love to see what everyone is creating with it! Thanks! Tom

Sorry for the disappointment, but Corona will not be developed for any DCC other than the two currently supported. Best regards, Tom.

Also Corona 12 keeps crashing.

Sorry to hear you are having problems - for any crashes please send in a ticket at support.chaos.com/requests/new as our tech support team (who are the ones who can help you) won't see any comments made on RUclips. In the ticket, so we can help you as quickly as possible without having a round of questions first, be sure to mention version of Corona, host software, version of host software, any error at the time of the crash, steps of what you were doing when the crash occurred, the mini dump, and preferably if possible the scene file. Thanks, Tom

No, that is what is called "Live Link" and is not in Corona 12. Live link will be added in Corona 13, though primarily as a means of rendering animations created in 3ds Max or Cinema 4D - only time will tell if it is "fast and responsive" enough to use as a kind of "replacement for IR". Thanks! Tom

Sorry you didn't like it. However, demos are always going to be made in-house, but thanks for the offer! Tom

TY! Yes indeed, as you say, it's a separate product from anything else from Chaos, and just like V-Ray users, Corona users would need to purchase a license for it. Meantime you can use the trial version to test out the functionality from Corona! Thanks! Tom

Ohhh yes! =D

Yes, Vantage is a separate product so needs to be purchased separately, the same being true for V-Ray users. This is something we emphasized when people on the forums were asking for Vantage compatibility. Meantime to try it out before you buy, there is a trial for Vantage so you can try out the functionality! Thanks! Tom

Thanks for the question! That one is most likely going to need input from the Vantage team, can you send the question in via ticket at support.chaos.com/requests/new - if you can take that little extra time to send it in, it can get through to the right team or teams to give an answer on future plans. Thanks! Tom

Should actually be a much easier to use alternative for some projects and use cases ;) Thanks! Tom

Corona uses the processor and not the video card

@@robsonhenrique4346 это хорошо. А сколько ядер у тебя проц получается?

Howdy! This tutorial was recorded with a 5995wx CPU and 2x 4090 GPUs. Quick note, AMD cards also work with Vantage.

Been such a fan of Red since the original VII :) I don't normally buy figurines, but I couldn't pass up on this one! Tom

Thank you for the kind words! Tom

Just one more, I think, from the last video. I've stopped now. Honest! ;) Tom

But there is GPU, that is the main feature of the release - the ability to move your scene to real time ray tracing with Vantage. Thanks! Tom

@@ChaosCorona Great! Even more awesome, now you only have to pay 54usd per month more to get it render on GPU, good job

Which given the power and usability of Vantage is very reasonable. Not to mention there will never and never would have been a Corona GPU, so this is at least a way to have both options in your toolset. Thanks! Tom

@@ChaosCorona nice business model

@@perori_neko yes having vantage support is not considered as GPU support, its more like conversion . Its like converting corona material to vray and then exporting to vantage.:(

Correct, but the capping is very specific - it only caps holes created by the Crop Box, not holes that were already there etc. We'll cover it in a future Pattern tutorial about the new features. Thanks! Tom

Glad you enjoyed it! Tom

Thank you! We hope it does indeed save you lots of time, as time is valuable. Best regards! Tom

Scatter was used to create the "fuzz" effect, and that was then converted to geometry to be used in the pattern. Hope this helps! Tom

Hahaha things move fast! We aim to do 2 versions a year, and I believe there was only 1 year in Corona's 9 year history where that did not happen. So next up will be 13, somewhere around end of October / start of November. Thanks! Tom